One-Part – Fast Setting – Deck-O-Seal – Tan
HS-1 SL is a one-part, self-leveling hybrid sealant, developed with silyl-modified polymer (SMP) technology. It cures under the influence of atmospheric moisture to form a medium modulus sealant with excellent adhesive properties and resistance to ageing and weathering.
HS-1 SLOne-Part, Self-Leveling, SMP-Based Sealant
HS-1 SL is a one-part, self-leveling hybrid sealant, developed with silyl-modified polymer (SMP) technology. It cures under the influence of atmospheric moisture to form a medium modulus sealant with excellent adhesive properties and resistance to ageing and weathering.
USESHS-1 SL can be used in movement and connection joints. Ideal applications include indoor and outdoor pool decks subject to pedestrian traffic.
FEATURES/BENEFITS
- One part – no mixing is needed on site.
- Self-leveling.
- Supplied in convenient pouches – no tooling or caulk gun needed.
- Pouch can be resealed.
- Allows movement capability of 25%.
- Cures bubble-free.
- Adheres to green concrete and damp surfaces.
- Adheres well to most construction materials.
- Is permanently elastic over a wide range of temperatures.
- Resists chlorinated water splashes.
- Non-gassing.
- VOC-compliant.
PACKAGING32 Oz. (946.4 mL) Pouches (6/Carton)
COVERAGEApproximate number of lineal feet that can be sealed with 32 oz. (946.4 mL) HS-1 SL pouch.
Width of Joint
| Depth of Joint | 1/4″ | 3/8″ | 1/2″ | 5/8″ | 3/4″ | 7/8″ | 1″ |
| 1/4″ | 77 | 51 | 35 | 31 | 26 | 22 | 19 |
| 3/8″ | 34 | 26 | 21 | 17 | 15 | 13 | |
| 1/2″ | 19 | 15 | 13 | 11 | 10 |
SHELF LIFEOne year from date of manufacture. Store unopened product in a cool, dry place under 80° F (27° C).
TECHNICAL DATA
| Available Colors: | Gray, Tan |
| VOC Content: | 0 g/L |
| Skin-Time: | 15 – 30 Minutes |
| Tack-Free Time: | 45 – 90 Minutes |
| Cure Time: | ¼” (6.4 mm) bead per 24 hours |
Times listed above may vary depending on temperature and humidity during and after application.
APPLICATIONSurface Preparation … Surfaces must be clean, free of oil, grease or rust and of sound quality. Remove all loose particles or residues with a jet of compressed air, sandpaper, or hard brush. Glass, metal, and other non-porous surfaces must be free of any coatings and wiped clean with solvent.
Priming … For optimum adhesion and/or joints over 1″ in width, P/G PRIMER, is recommended.
Cleanup … Clean tools with solvent or alcohol immediately after use. Cured material can only be removed mechanically.
PRECAUTIONSDo not use in underwater applications.
