USA Made DIY Pole Bender!
US-made hoop bender from Bootstrap Farmer. These 4′, 6′, 10′, 12′, 16′, and 20′ heavy-duty benders are fabricated in Texas. The 10′, 12′, 16′ and 20′ work with 1” top rail for DIY hoop house greenhouses.Bent alongHeavy Duty channel, this is the strongest pole bender on the market with a redesigned leverage bar and finished with a powder coat finish for all-weather protection and unlimited hoops. The 4′ and 6′ are specially designed to work with 3/4″ EMT.
Available for 4′, 6′, 10′, 12′, 16′, and 20′ hoop sizes
Also check out our diy gothic bender!
Features
- Made in the USA
- 4′ and 6′ benders work with 3/4″ EMT or 1/2″ EMT
- 10′, 12′, 16′, and 20′ benders work with 1 3/8″ Top Rail
- Bends Hoops for DIY Greenhouses
- Powder Coated for Weather Protection
- PDF Instructions
Each hoop bender includes
- Pole Bender
- Hardware for attachment to any solid flat surface
- Extension bar for added leverage at the end of your bend
- 4′ and 6′ Benders Do Not Include Extension Bar – as it is not needed
Conduit needed for caterpillar or high tunnel greenhouse (hoop house)
- 4′ and 6′ caterpillar tunnel – (1) 10′ x 3/4″ or 1/2″ EMT per hoop
- 10′ and 12′ wide high tunnel hoop house – (2) 10.5′ x 1″ top rail per hoop
- 16′ wide high tunnel hoop house- (2.5) 10.5′ x 1″ top rail per hoop
- 20′ wide high tunnel hoop house – (3) 10.5′ x 1″ top rail per hoop
Greenhouse Width|Approximate Height
4′| 47″6’| 40″10′ | 8.5’12’ |8’16’| 9.5′
20′ |10.75’Install the bender 5-6 feet above the ground to provide enough working space. To keep the hoop steady, mount the bender on a flat surface that’s at least 4 feet long. This will ensure the hoop bends in the desired direction without curving when upright.
Video Tutorials
Hoop Bender 101-
Bending a 4′ Hoop-
Bending 16′ Hoops-
Bending 6-20′ Hoops-
