California Energy Commission (CEC) CEC Title 20 Section 1605.3(g)(5) requires any motor used for residential filter pump applications and manufactured before July 19, 2021 that is greater than or equal to 1.0 THP be replaced with a two-speed or variable speed motor. Effective July 19, 2021 CEC Title 20 1605.3(g)(6) requires any motor used for replacement dedicated-purpose pool pump motor on all residential and commercial applications and manufactured on or after July 19, 2021 that is greater than or equal to 0.5 THP be replaced with a variable speed motor.
This motor can not be sold in California.
Century Replacement Motors – 1 HP, 115/230 Volts, C Frame 56J, Threaded Shaft – ST1102
Features
- Sealed Ball Bearings
- Capacitor Start
- Sealed Switch Design
- 50°C Ambient
- 303 Stainless Shaft
- UL 1081 Design
- 304 Bearing Shaft End
- Threaded Shaft
General Specifications
| Model : | ST1102 | Catalog No : | ST1102 |
| Part Description : | 1 HP 3450 115/230 ODP 56J THD SHAFT | Category : | Induction Motors |
| Stock : | Yes |
Nameplate Specifications
| Output HP : | 1 Hp | Output KW : | 0.75 kW |
| Frequency : | 60 Hz | Voltage : | 230/115 V |
| Current : | 9.3/18.6 A | Speed : | 3450 rpm |
| Service Factor : | 1.5 | Phase : | 1 |
| Duty : | Continuous | Insulation Class : | B |
| Frame : | 56J | Enclosure : | Open Drip Proof |
| Overload Protector : | Automatic | Ambient Temperature : | 50 °C |
| UL : | Recognized | CSA : | Y |
Technical Specifications
| Electrical Type : | Cap Start Motor | Poles : | 2 |
| Rotation : | Counterclockwise Pump End | Mounting : | Round |
| Motor Orientation : | Horizontal | Drive End Bearing : | BALL |
| Opp Drive End Bearing : | BALL | Frame Material : | Rolled Steel |
| Shaft Type : | Threaded | Overall Length : | 14.70 in |
| Frame Length : | 8.75 in | Shaft Diameter : | 0.625 in |
| Shaft Extension : | 2.562 in | UPC : | 786674031785 |
| Weight : | 26.00 LB |
