AquaChek 562012 Pro Borate Test Strips (25 Count)0 to 80 ppm Borate
The AquaChek 562012 Pro Borate Test Strips make it quick and easy to measure borate levels in pool water.
Borates are commonly used as a pH buffer to help reduce pH drift, improve water feel, and support clearer water when your
pool is properly balanced. These strips are a simple way to confirm your borate level stays in the recommended range after adding a borate
product or performing water replacement.
What It Tests
- Borate level in pool water
Key Features
- Fast results with an easy-to-read color chart
- Range: 0 to 80 ppm borate
- 25 test strips per bottle
- Works with any brand of borate product
- Helpful for verifying borate after dosing, splash-out, backwashing, rain dilution, or partial drain/refill
Recommended Borate Range (General Guidance)
- Many pool setups target approximately 3050 ppm borate (follow your borate product directions and pool professional guidance)
How to Use
- Dip one strip into the pool water and remove immediately.
- Hold the strip level, pad side up, for about 15 seconds.
- Compare the test pad color to the chart on the bottle label to read the borate level.
Why Test Borates?
- Helps confirm your borate level is in range after adding borates
- Supports more stable pH control (reduced pH bounce)
- Useful for troubleshooting water balance changes after dilution or water replacement
Whats Included
- (1) Bottle of 25 AquaChek Pro Borate test strips (562012)
Related Products
- AquaChek 562012 Borate Test Strips (search)
- Borate Pool Test Strips (search)
- Pool Water Test Kits (search)
- pH Test Strips (search)
- Total Alkalinity Test Strips (search)
Maintenance Tips
- Store strips cool and dry with the cap tightly closedhumidity can ruin test pads.
- Use clean, dry hands when removing strips; avoid touching the test pad.
- Test water away from return jets for a more representative sample.
- If you make major water changes (drain/refill), re-test borates afterward to confirm your new level.
